CMI Home  |   Site Map  |   Contact Us  
Mermaid 5,200 BTU Marine Air Conditioner
Pleasure Craft | Commercial Marine | Industrial Products | Repair/Tech Services

MERMAID MARINE AIR CONDITIONERS, HEATERS AND ELECTRIC COOLERS

AIR CONDITIONERS & CLIMATE CONTROL

MARINE AIR CONDITIONERS & HEATERS

   M5 - 5,200 BTU
   M6 - 6,500 BTU
   M9 - 9,000 BTU
   M12 - 12,000 BTU
   M16 - 16,500 BTU

MARINE DEHUMIDIFIERS

ICE MAKERS & ELECTRIC COOLERS

MARINE ICE MAKERS

PORTABLE ELECTRIC COOLERS/FREEZERS

MISCELLANEOUS:

ACCESSORIES

CONTACT US ABOUT MERMAID AIR PRODUCTS


Boat Air Conditioners - Mermaid Marine Air
Conditioner Model M5 - 5,200 BTU

  • Solid Stainless Steel Base
  • Light Weight, Low Profile
  • Comes Standard with Digital Controls
  • Pre-charged and Pre-wired
  • Easy to install for the "do-it-yourselfer"
  • Full Five Year Warranty!
Contact us about Mermaid Boat Air Conditioners

The M5-5,200 BTU Boat Air Conditioning System - Smallest Footprint on the Market!

The M5 boat air conditioning system has the smallest footprint on the market and weighs in at just 31.5 lbs for the unit, and 4.7 lbs for the electrical box! Designed for cruisers up to 26' and sailboats up to 28', the M5 Model can also be used to cool cabins or sleeping compartments of up to 450 cubic feet on larger boats. The M5 unit is ideal for the "tight fit" installations and works great for individually climate controlled cabins on much larger vessels!
 

M5 Marine Air Conditioners - Power Requirements & Specifications:

This unit will run off the new Honda eu1000i 1,000 watt portable generator, while in cool mode. Another option is to use a Statpower 1,000 Watt Inverter and 400 amp hours of battery power and you can anchor out (on average) for one night. Due to the construction of this unit, electric heat is not an option with this unit.

Ducting: This unit has a rotatable blower and tapers down to a "V" shape for those odd angle discharge installations. We use 4” ducting and recommend a minimum of 2, 4” round supply grills with this installation. Cool-Only Unit Dimensions: L-15" W-11.5" H-11.5. Reverse Cycle Unit Dimensions: L-18" W-12" H-11.5" Running Amperage: Cool = 4.4 amps, Reverse Cycle = 5.5 amps (Add approximately one amp for the standard seawater pumps. Startup amperage is calculated by running amperage multiplied by 1.8).

Model M-5C - Cool only
Model M-5CHP - Cool/Reverse Cycle Heat

Above models include a programmable digital thermostat!
 

Mermaid Marine Air Conditioner/Heater Manuals

Installation Guide (462K pdf)
Schematics (665K pdf)
 

Installation Kits and Options:

A complete basic installation kit including electrical connection kit, Footscoop, seacock, water strainer, and dual ducting kit is available, as well as a deluxe kit (see list below). The Inverter kit and batteries are optional. (PUMP NOT INCLUDED). All units are available in 220v for an additional $100.00, and require a 72 hour lead time.

BASIC INSTALLATION KIT LIST

QTY

5/8" THRU HULL/OVERBOARD 1
3/8" DRAIN HOSE 6'
5/8" MARINE HOSE 20'
3/4" MARINE HOSE 3'
4" ROUND PLASTIC SUPPLY AIR GRILLS (WHITE) 2
BALL VALVE (SEACOCK) 1
BRONZE FOOT SCOOP 1
WATER STRAINER W/BRACKET 1
BLEED OFF VALVE 1
PVC-3/4" THREAD TO HOSE ELBOW 1
3/4" CLOSED END NIPPLE 1
4" X 4" X 4" METAL WYE 1
RETURN AIR GRILL/ALUMINUM 12 X 8 1
DUCT 4" NON-INSULATED 25'
STANDARD MARINE CIRCUIT BREAKER 1
12/3 GAUGE BOAT POWER CABLE 15'
16/3 GAUGE PUMP POWER CABLE 15'
#12 STAINLESS STEEL HOSE CLAMP 8
#8 STAINLESS STEEL HOSE CLAMP 12
#8 - 1/2" STAINLESS STEEL MOUNT SCREWS 12
#14 - 2" STAINLESS STEEL MOUNT SCREWS-A/C 4
14" TIE STRAPS 20

DELUXE INSTALLATION KIT LIST

QTY

THERMOSTAT FACE PLATE WHITE 1
5/8" THRU HULL/OVERBOARD CHROME 1
CHROME DRIP EDGE 1
3/8" DRAIN HOSE 9'
5/8" MARINE HOSE BLK REINF 25'
3/4" MARINE HOSE BLK REINF 5'
TEAK 4" X 4" SUPPLY AIR GRILL 2
PLASTIC TRANSITION BOX 4"X 4" W/4" RING END 2
BALL VALVE (SEACOCK) 1
BRONZE FOOT SCOOP 1
GRACO RAW WATER STRAINER (BRONZE) 1
BLEED OFF VALVE 1
PVC-3/4" THREAD TO HOSE ELBOW 1
3/4" CLOSED END NIPPLE 1
4" X 4" X 4" PLASTIC HOSE WYE 1
RETURN AIR GRILL/TEAK 12" X 8" 1
DUCT 4" NON-INSULATED 25'
STANDARD MARINE CIRCUIT BREAKER 1
12/3 GAUGE BOAT POWER CABLE 20'
16/3 GAUGE PUMP POWER CABLE 20'
#12 STAINLESS STEEL HOSE CLAMP 8
#8 STAINLESS STEEL HOSE CLAMP 12
#8 - 1/2" STAINLESS STEEL MOUNT SCREWS 12
#14 - 2" STAINLESS STEEL MOUNT SCREWS-A/C 4
INSULATED MOUNT PAD 1
14" TIE STRAPS 20

 


Contact Us About Mermaid Boat Air Conditioners!


Control Masters Marine Systems
1704 Lakeside Avenue, Suite 3
Saint Augustine, Florida 32084
Phone: 904-260-9756
Email: sales@marineenginecontrols.com

Copyright 2018 Control Masters Marine Systems Corp. All rights reserved.