The M9 Boat Air Conditioning System
- Smallest Footprint 9,000 BTU Marine A/C on the Market!
This compact, powerful boat
air conditioner/heater unit is available in right, left or top discharge,
and Cool Only, Cool/Reverse Cycle Heat, or Cool/Electric Heat
configurations. In order to keep the smallest footprint on the market, the
M9 uses the same stainless steel base as the Model M6-6,500 BTU unit. The
electric heat option generates 5,640 BTU of heat and the electric heat
option is not available in 220/240 Volt configurations.
The M9 marine air
conditioning unit is designed for
cruisers up to 30' and sailboats up to 32', and can
also be used to cool cabins or individual sleeping compartments of up
to 800 cubic feet on much larger vessels!
M9 Marine Air Conditioners - Power Requirements & Specifications:
Ducting: We use 4”
and 6” ducting and recommend a minimum of 3, 4” round supply grills with
this installation. Unit Dimensions: L-16" W-11.5" H-11.5" (left and
top discharge, add 1" in length) . Running Amperage:
Cool = 7amps, Electric Heat = 17.5 amps, Reverse Cycle = 8 amps (Add
approximately one amp for the standard seawater pumps. Startup amperage is calculated by running amperage multiplied by 1.8).
Model M-9C - Cool only
Model M-9CEH - Cool/Electric Heat
Model M-9CHP - Cool/Reverse Cycle Heat
Above models include a programmable digital thermostat!
Mermaid Marine Air Conditioner/Heater Manuals
Installation Guide
(462K pdf)
Schematics
(665K pdf)
Installation Kits and Options:
A complete basic installation kit including electrical connection kit, Footscoop, seacock, water strainer,
and dual ducting kit is available, as well as a deluxe kit (see list
below).
The Inverter kit and batteries are optional. (PUMP NOT INCLUDED).
All units are available in 220v for an additional $100.00, and require a
72 hour lead time.
BASIC INSTALLATION
KIT LIST
|
QTY |
5/8" THRU HULL/OVERBOARD |
1 |
3/8" DRAIN HOSE |
6' |
5/8" MARINE HOSE |
20' |
3/4" MARINE HOSE |
3' |
4" ROUND PLASTIC SUPPLY AIR GRILLS (WHITE) |
2 |
BALL VALVE (SEACOCK) |
1 |
BRONZE FOOT SCOOP |
1 |
WATER STRAINER W/BRACKET |
1 |
BLEED OFF VALVE |
1 |
PVC-3/4" THREAD TO HOSE ELBOW |
1 |
3/4" CLOSED END NIPPLE |
1 |
4" ROUND PLASTIC SUPPLY
AIR GRILLS (WHITE) |
1 |
6 X 4 X 4 METAL WYE |
1 |
4" X 4" X 4" METAL WYE |
1 |
RETURN AIR GRILL/ALUMINUM 12 X 8 |
1 |
4" NON INSULATED FLEX
DUCT |
25' |
6" NON INSULATED FLEX
DUCT |
6' |
STANDARD MARINE CIRCUIT BREAKER |
1 |
12/3 GAUGE BOAT POWER CABLE |
20' |
16/3 GAUGE PUMP POWER CABLE |
20' |
#12 STAINLESS STEEL HOSE CLAMP |
8 |
#8 STAINLESS STEEL HOSE CLAMP |
12 |
RUBBER MOUNTING BLOCK |
2 |
#8 - 1/2" STAINLESS STEEL MOUNT SCREWS |
18 |
#14 - 2" STAINLESS STEEL MOUNT SCREWS-A/C |
4 |
14" TIE STRAPS |
20 |
DELUXE
INSTALLATION KIT LIST
|
QTY |
THERMOSTAT FACE PLATE WHITE |
1 |
5/8" THRU HULL/OVERBOARD CHROME |
1 |
CHROME DRIP EDGE |
1 |
3/8" DRAIN HOSE |
9' |
5/8" MARINE HOSE BLK REINF |
25' |
3/4" MARINE HOSE BLK REINF |
5' |
TEAK 4" X 4" SUPPLY AIR GRILL |
3 |
PLASTIC TRANSITION BOX 4"X 4" W/4" RING END |
3 |
BALL VALVE (SEACOCK) |
1 |
BRONZE FOOT SCOOP |
1 |
GRACO RAW WATER STRAINER (BRONZE) |
1 |
BLEED OFF VALVE |
1 |
PVC-3/4" THREAD TO HOSE ELBOW |
1 |
3/4" CLOSED END NIPPLE |
1 |
6 X 4 X 4 PLASTIC HOSE
WYE |
1 |
4" X 4" X 4" PLASTIC HOSE WYE |
1 |
RETURN AIR GRILL/TEAK 12" X 8" |
1 |
4" NON INSULATED FLEX
DUCT |
25' |
6" NON INSULATED FLEX
DUCT |
6' |
STANDARD MARINE CIRCUIT BREAKER |
1 |
12/3 GAUGE BOAT POWER CABLE |
25' |
16/3 GAUGE PUMP POWER CABLE |
25' |
#12 STAINLESS STEEL HOSE CLAMP |
8 |
#8 STAINLESS STEEL HOSE CLAMP |
12 |
INSULATED MOUNT PAD |
1 |
#8 - 1/2" STAINLESS STEEL MOUNT SCREWS |
18 |
#14 - 2" STAINLESS STEEL MOUNT SCREWS-A/C |
4 |
14" TIE STRAPS |
20 |
|